14070 Proton Road Suite 100 LB 9 Dallas, TX 75244

Aluminum Coated Type 2

NCSPA » CSP Coatings » Aluminum Coated Type 2
OverviewALT2 ApplicationsDOT InformationSuccess StoriesResources

Aluminum Coated Type 2

 

corrugated steel pipe detention system large volume detention systemAluminum Coated Type 2 (AASHTO M274, ASTM A929) is a pure aluminum coating (no more than 0.35 percent silicon). It is produced with a coating weight of 305 g/m² (1 oz/ft²) of surface (total both sides) to provide a coating thickness of 48 µm (0.0019 in.) on each surface. The aluminum coated type 2 (ALT2) is the most widely used supplemental coating for CSP. “Aluminum is a reactive metal, but it develops a passive aluminum oxide coating or film that protects it from corrosion in many environments.” This film is quite stable in neutral and many acid solutions but is attacked by alkalies greater than a pH of 9. From a corrosion standpoint, aluminum has an advantage over galvanized in lower pH and in soft water conditions due to the formation of the oxide film. The coatings are essentially equal under abrasion and in waters where the zinc oxide film forms rapidly.

Aluminum coated type 2 CSP has been installed at thousands of sites over the past 50 years and many of these sites have been and are still being monitored for performance. Recent AK Steel research has indicated that 14 gage ALT2 CSP can achieve a 100-year service life when the environmental conditions have a pH of 5 to 9 and a resistivity greater than 1500 ohm-cm.

For more information download our Pipe Selection Guide found here.

DOT Information

The below is a map of the states that currently accept ALT2 coated pipe and plate in their specs.

Success Stories

bridge rehabilitation

2022 Project of the Year Winner – Structural Plate: Norfolk Southern Bridge Over Stoney Creek

By: Lane Enterprises A widespread problem for the railways is the many stone arch bridges and tunnels having reached the end of their service life. ... Read more

2022 Project of the Year Winner – Rehabilitation: Brookport Levee Culvert Reline

By: Contech Engineered Solutions The original construction of the Brookport Levee, located in Illinois, began in 1940. In 1949, the City of Brookport took over ... Read more

2022 Project of the Year Winner – Going Green: High Speed Railway Ecological Overpass

By: ViaCon Turkey   This amazing project is the first ever corrugated steel plate ecological overpass constructed on a high speed railway in the world!  ... Read more

Studies, Resources & Marketing Materials

Portland Web Design - Watermelon Web Works LLC